Thermal continuity
Contributes insulation across the surface and helps address thermal bridges within the selected wall assembly.
Deema Trading Building solutions
A smarter building
Advanced building material · Kuwait project support
A smarter building
envelope.
U-STUCCO™ combines lightweight cement plaster, thermal performance and moisture management in a versatile system for residential, commercial, civil and industrial applications.
R-2.2/inPublished thermal value for XPX
One coatUp to 1 inch in a single pass
Trowel / sprayFlexible application method
VOC-freeManufacturer-stated formulation
Kuwait relevance
Performance where the
building needs it.
U-STUCCO is considered at system level: substrate, thickness, exposure, finish, fire strategy and project approvals must all align before specification.
Fire-resilient construction
Designed for use in fire-conscious wall systems, subject to the specified assembly and applicable test evidence.
Moisture management
Hydrophobic yet vapour-permeable characteristics support wall durability in humid and coastal conditions.
Application efficiency
A ready-to-mix, one-coat approach can reduce site mixing and simplify the traditional multi-layer process.
Lower material weight
Lightweight formulations reduce applied dead load and can improve handling and freight efficiency.
Substrate versatility
Options are published for concrete, AAC, CMU, ICF, insulation boards and selected prepared panel systems.
Product family
Select the formulation by application.
The system combines two performance-focused base formulations with a refined architectural finish.
XPX
Lightweight performance
Insulated base coat
U-STUCCO’s lightest formulation, published at R-2.2 per inch and designed for thermal efficiency, weather resistance and crack control.
- AAC, CMU, ICF and concrete
- 3D-printed concrete
- MgO and fibre-cement boards
HPX
High-strength protection
Durable base or top coat
A higher-cement formulation intended for greater compressive strength, impact resistance and demanding project environments.
- Schools and healthcare facilities
- Commercial and public buildings
- Industrial and high-traffic areas
SFX
Architectural finish
Smooth finishing coat
A premium smooth finish applied over XPX or HPX for interior or exterior surfaces requiring a refined appearance.
- Residences and hotels
- Lobbies, offices and ceilings
- Feature walls and detailed finishes
Official application videos
See the material
in action.
Watch application demonstrations published by U-STUCCO. Each resource opens the manufacturer’s official YouTube channel in a new tab.
Application demonstration
U-STUCCO: AAC Blocks Application
View the manufacturer’s demonstration of the material applied to autoclaved aerated concrete blocks.
Watch on YouTube ↗Application methods
AAC Block: Spray & Trowel Application
See two application methods demonstrated on an AAC substrate by the U-STUCCO team.
Watch on YouTube ↗Official channel
More U-STUCCO application and product resources.
Use the channel for the manufacturer’s latest mixing, installation and system demonstrations.
Explore the full channel ↗Videos provide general manufacturer guidance. Always use the current technical data sheet, approved project specification and project-specific installation requirements.
Deema project support
From concept review
to site readiness.
Deema coordinates the Kuwait-side technical and commercial work required to evaluate U-STUCCO for a defined project.
- 01
Define
Confirm substrate, area, exposure, finish and project requirements.
- 02
Select
Identify the suitable formulation, thickness and system build-up.
- 03
Validate
Coordinate samples, technical data and relevant manufacturer evidence.
- 04
Submit
Prepare the commercial basis and project-specific technical package.
- 05
Support
Coordinate material supply, application guidance and closeout.
Published substrate range
ConcreteAACCMUICFEPS / XPSRockwoolFibre cementMgOPrepared steel
Technical basis
Approve the system—not a headline.
Performance figures shown on this page are based on information published by the manufacturer. Project suitability must be confirmed against the current technical data, test reports, specified substrate, applied thickness, workmanship and complete wall assembly.
Fire rating, code compliance, energy contribution and authority acceptance are project-specific. Deema can coordinate the required technical review; final approval remains with the consultant, client and competent authorities.
Project enquiry
Evaluate U-STUCCO for your Kuwait project.
Share the drawings, wall build-up, substrate, area, required finish and approval criteria. Deema will coordinate a project-specific review.